Audient EVO 4 vs SSL 2+ USB Audio Interface compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
The SSL 2+ USB Audio Interface wins Audio Resolution, Monitoring and Connectivity. It is the pricier of the two at $199, so the Audient EVO 4 stays the pick if $70 matters more than those specs.
Unless…
At a Glance
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | Audient EVO 4 | SSL 2+ USB Audio Interface |
|---|---|---|
| Audio Resolution | 7.5/10 | 10/10 |
| Preamps | 9.7/10 | 9.9/10 |
| Mic Inputs | 10/10 | 10/10 |
| Monitoring | 7.5/10 | 10/10 |
| Creator Features | 10/10 | 5/10 |
| Connectivity | 5/10 | 10/10 |
The Split
Compact 2-in/2-out USB-C interface with Smartgain and clean preamps for creators and podcasters.
On paper the Audient EVO 4 takes loopback (Yes) and dynamic range (113dB, +2.5dB). It gives up sample rate and headphone outputs to the SSL 2+ USB Audio Interface. It is the cheaper of the two, by $70.00.
Leads on
Loopback routes computer audio back into the stream without a second interface or cable.
Wider converter dynamic range means less noise between the quietest and loudest parts of a take.
Desktop audio interface intended for creator workflows, microphone input, monitoring, and clean signal routing.
On paper the SSL 2+ USB Audio Interface takes sample rate (192kHz, +96kHz), headphone outputs (2, +1), TRS outputs (4, +2) and preamp gain (62dB, +4dB). It gives up loopback and dynamic range to the Audient EVO 4. That costs $70.00 more than the Audient EVO 4.
Leads on
Higher sample rates capture more audio detail — important for professional recording and mixing.
A second headphone output lets a guest monitor without a splitter.
More TRS outputs allow routing to studio monitors and outboard gear.
More gain drives quiet dynamic microphones like the SM7B without a separate booster.
These 7 specs are the same on both of them, so none of it is part of the decision.
The Record
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
The SSL 2+ USB Audio Interface is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
The clearest difference is loopback, which the Audient EVO 4 has and the SSL 2+ USB Audio Interface does not. Across the catalog's specification sheet the two differ on 6 specs. They match on 7 specs, including connection type, bit depth and phantom power. Two audio interfaces from Audient and SSL, each taking a different approach to audio quality and I/O flexibility.
Get the SSL 2+ USB Audio Interface. The SSL 2+ USB Audio Interface wins Audio Resolution, Monitoring and Connectivity. It is the pricier of the two at $199, so the Audient EVO 4 stays the pick if $70 matters more than those specs.
Both share 7 specifications in the catalog, including connection type (usb-c, xlr, trs), bit depth (24-bit), phantom power (Yes) and XLR inputs (2), among others. None of those is a reason to pick one over the other.
The SSL 2+ USB Audio Interface costs $199.00 against $129.00, a difference of $70. The premium buys sample rate (192kHz), headphone outputs (2) and TRS outputs (4). Whether that is worth it depends on which of those you would actually use.