Audient EVO 4 vs Solid State Logic UF8 Audio Interface
Audient EVO 4 vs Solid State Logic UF8 Audio Interface compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
Audient EVO 4 or Solid State Logic UF8 Audio Interface? Get the Solid State Logic UF8 Audio Interface, narrowly.
The Solid State Logic UF8 Audio Interface wins Audio Resolution — but only just, and the rest of the chart is close. It is the pricier of the two at $199, so the Audient EVO 4 stays the pick if $70 matters more than those specs.
At a Glance
Where each one actually leads
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | Audient EVO 4 | Solid State Logic UF8 Audio Interface |
|---|---|---|
| Audio Resolution | 7.5/10 | 10/10 |
| Mic Inputs | 10/10 | 10/10 |
| Connectivity | 10/10 | 10/10 |
| Value | 10/10 | 6.5/10 |
The Split
What each one wins
Audient EVO 4
Compact 2-in/2-out USB-C interface with Smartgain and clean preamps for creators and podcasters.
It gives up sample rate to the Solid State Logic UF8 Audio Interface. It is the cheaper of the two, by $70.00.
Leads on
- Nothing on the spec sheet goes this one’s way.
Solid State Logic UF8 Audio Interface
Desktop audio interface intended for creator workflows, microphone input, monitoring, and clean signal routing.
On paper the Solid State Logic UF8 Audio Interface takes sample rate (192kHz, +96kHz). It concedes nothing measurable on the sheet. That costs $70.00 more than the Audient EVO 4.
Leads on
-
Sample Rate +96kHz192kHz96kHz
Higher sample rates capture more audio detail — important for professional recording and mixing.
Where they’re identical
These 5 specs are the same on both of them, so none of it is part of the decision.
- Connection Type usb-c, xlr, trs
- Bit Depth 24-bit
- Phantom Power Yes
- XLR Inputs 2
- TRS Outputs 2
The Record
19 specs, grouped by area
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
Who each one is for
The Solid State Logic UF8 Audio Interface is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
Frequently Asked Questions
What is the main difference between Audient EVO 4 and Solid State Logic UF8 Audio Interface?
The largest gap is sample rate, where the Solid State Logic UF8 Audio Interface leads — 192kHz against 96kHz. Across the catalog's specification sheet the two differ on 1 spec. They match on 5 specs, including connection type, bit depth and phantom power. Two audio interfaces from Audient and Solid State Logic, each taking a different approach to audio quality and I/O flexibility.
Which is better for streaming, Audient EVO 4 or Solid State Logic UF8 Audio Interface?
Get the Solid State Logic UF8 Audio Interface, narrowly. The Solid State Logic UF8 Audio Interface wins Audio Resolution — but only just, and the rest of the chart is close. It is the pricier of the two at $199, so the Audient EVO 4 stays the pick if $70 matters more than those specs.
What do the Audient EVO 4 and Solid State Logic UF8 Audio Interface have in common?
Both share 5 specifications in the catalog, including connection type (usb-c, xlr, trs), bit depth (24-bit), phantom power (Yes) and XLR inputs (2), among others. None of those is a reason to pick one over the other.
Is the Solid State Logic UF8 Audio Interface worth the extra $70 over the Audient EVO 4?
The Solid State Logic UF8 Audio Interface costs $199.00 against $129.00, a difference of $70. The premium buys sample rate (192kHz). Whether that is worth it depends on which of those you would actually use.