Universal Audio Volt 2 vs SSL 2+ USB Audio Interface compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
The SSL 2+ USB Audio Interface wins Monitoring and Connectivity — but only just, and the rest of the chart is close. It is the pricier of the two at $199, so the Universal Audio Volt 2 stays the pick if $10 matters more than those specs.
Unless…
At a Glance
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | Universal Audio Volt 2 | SSL 2+ USB Audio Interface |
|---|---|---|
| Audio Resolution | 10/10 | 10/10 |
| Preamps | 9.4/10 | 8.5/10 |
| Mic Inputs | 10/10 | 10/10 |
| Monitoring | 7.5/10 | 10/10 |
| Creator Features | 10/10 | 10/10 |
| Connectivity | 5/10 | 10/10 |
The Split
2-in/2-out USB audio interface with high-quality preamps and analog-inspired tone shaping.
On paper the Universal Audio Volt 2 takes dynamic range (112dB, +1.5dB). It gives up headphone outputs and TRS outputs to the SSL 2+ USB Audio Interface. It is the cheaper of the two, by $10.00.
Leads on
Wider converter dynamic range means less noise between the quietest and loudest parts of a take.
Desktop audio interface intended for creator workflows, microphone input, monitoring, and clean signal routing.
On paper the SSL 2+ USB Audio Interface takes headphone outputs (2, +1), TRS outputs (4, +2) and preamp gain (62dB, +7dB). It gives up dynamic range to the Universal Audio Volt 2. That costs $10.00 more than the Universal Audio Volt 2.
Leads on
A second headphone output lets a guest monitor without a splitter.
More TRS outputs allow routing to studio monitors and outboard gear.
More gain drives quiet dynamic microphones like the SM7B without a separate booster.
These 10 specs are the same on both of them, so none of it is part of the decision.
The Record
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
The SSL 2+ USB Audio Interface is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
The largest gap is headphone outputs, where the SSL 2+ USB Audio Interface leads — 2 against 1. Across the catalog's specification sheet the two differ on 4 specs. They match on 10 specs, including connection type, sample rate and bit depth. Two audio interfaces from Universal Audio and SSL, each taking a different approach to audio quality and I/O flexibility.
Get the SSL 2+ USB Audio Interface, narrowly. The SSL 2+ USB Audio Interface wins Monitoring and Connectivity — but only just, and the rest of the chart is close. It is the pricier of the two at $199, so the Universal Audio Volt 2 stays the pick if $10 matters more than those specs.
Both share 10 specifications in the catalog, including connection type (usb-c, xlr, trs), sample rate (192kHz), bit depth (24-bit) and phantom power (Yes), among others. None of those is a reason to pick one over the other.