Arturia MiniFuse 2 vs Universal Audio Volt 2 compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
The Arturia MiniFuse 2 wins Creator Features — but only just, and the rest of the chart is close. It is also the cheaper of the two, by $39.01.
At a Glance
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | Arturia MiniFuse 2 | Universal Audio Volt 2 |
|---|---|---|
| Audio Resolution | 10/10 | 10/10 |
| Preamps | 8.5/10 | 8.5/10 |
| Mic Inputs | 10/10 | 10/10 |
| Monitoring | 10/10 | 10/10 |
| Creator Features | 10/10 | 5/10 |
| Connectivity | 10/10 | 10/10 |
The Split
USB-C audio interface with dual combo inputs, direct monitoring, and creator-ready loopback support.
On paper the Arturia MiniFuse 2 takes loopback (Yes) and preamp gain (56dB, +1dB). It gives up dynamic range to the Universal Audio Volt 2. It is the cheaper of the two, by $39.01.
Leads on
Loopback routes computer audio back into the stream without a second interface or cable.
More gain drives quiet dynamic microphones like the SM7B without a separate booster.
2-in/2-out USB audio interface with high-quality preamps and analog-inspired tone shaping.
On paper the Universal Audio Volt 2 takes dynamic range (112dB, +2dB). It gives up loopback and preamp gain to the Arturia MiniFuse 2. That costs $39.01 more than the Arturia MiniFuse 2.
Leads on
Wider converter dynamic range means less noise between the quietest and loudest parts of a take.
These 11 specs are the same on both of them, so none of it is part of the decision.
The Record
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
The Arturia MiniFuse 2 is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
The clearest difference is loopback, which the Arturia MiniFuse 2 has and the Universal Audio Volt 2 does not. Across the catalog's specification sheet the two differ on 3 specs. They match on 11 specs, including connection type, sample rate and bit depth. Two audio interfaces from Arturia and Universal Audio, each taking a different approach to audio quality and I/O flexibility.
Get the Arturia MiniFuse 2, narrowly. The Arturia MiniFuse 2 wins Creator Features — but only just, and the rest of the chart is close. It is also the cheaper of the two, by $39.01.
Both share 11 specifications in the catalog, including connection type (usb-c, xlr, trs), sample rate (192kHz), bit depth (24-bit) and phantom power (Yes), among others. None of those is a reason to pick one over the other.
The Universal Audio Volt 2 costs $189.00 against $149.99, a difference of $39. The premium buys dynamic range (112dB). Whether that is worth it depends on which of those you would actually use.