SSL 2+ USB Audio Interface vs Universal Audio Volt 2
SSL 2+ USB Audio Interface vs Universal Audio Volt 2: Get the SSL 2+ USB Audio Interface, narrowly. The SSL 2+ USB Audio Interface wins Monitoring and...
The Ruling
SSL 2+ USB Audio Interface or Universal Audio Volt 2? Get the SSL 2+ USB Audio Interface, narrowly.
The SSL 2+ USB Audio Interface wins Monitoring and Connectivity — but only just, and the rest of the chart is close.
Unless…
- You need preamps — get the Universal Audio Volt 2.
At a Glance
Where each one actually leads
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | SSL 2+ USB Audio Interface | Universal Audio Volt 2 |
|---|---|---|
| Audio Resolution | 10/10 | 10/10 |
| Preamps | 8.5/10 | 9.4/10 |
| Mic Inputs | 10/10 | 10/10 |
| Monitoring | 10/10 | 7.5/10 |
| Creator Features | 10/10 | 10/10 |
| Connectivity | 10/10 | 5/10 |
The Split
What each one wins
SSL 2+ USB Audio Interface
Desktop audio interface intended for creator workflows, microphone input, monitoring, and clean signal routing.
On paper the SSL 2+ USB Audio Interface takes headphone outputs (2, +1), TRS outputs (4, +2) and preamp gain (62dB, +7dB). It gives up dynamic range to the Universal Audio Volt 2. The two are priced the same, so price does not decide it.
Leads on
-
Headphone Outputs +121
A second headphone output lets a guest monitor without a splitter.
-
TRS Outputs +242
More TRS outputs allow routing to studio monitors and outboard gear.
-
Preamp Gain +7dB62dB55dB
More gain drives quiet dynamic microphones like the SM7B without a separate booster.
Universal Audio Volt 2
2-in/2-out USB audio interface with high-quality preamps and analog-inspired tone shaping.
On paper the Universal Audio Volt 2 takes dynamic range (112dB, +1.5dB). It gives up headphone outputs and TRS outputs to the SSL 2+ USB Audio Interface. The two are priced the same, so price does not decide it.
Leads on
-
Dynamic Range +1.5dB112dB110.5dB
Wider converter dynamic range means less noise between the quietest and loudest parts of a take.
Where they’re identical
These 10 specs are the same on both of them, so none of it is part of the decision.
- Connection Type usb-c, xlr, trs
- Sample Rate 192kHz
- Bit Depth 24-bit
- Phantom Power Yes
- XLR Inputs 2
- Direct Monitoring Yes
- Loopback No
- ADAT Expansion No
- MIDI I/O In/Out
- Bus Powered Yes
The Record
19 specs, grouped by area
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
Who each one is for
The SSL 2+ USB Audio Interface is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
Frequently Asked Questions
What is the main difference between SSL 2+ USB Audio Interface and Universal Audio Volt 2?
The largest gap is headphone outputs, where the SSL 2+ USB Audio Interface leads — 2 against 1. Across the catalog's specification sheet the two differ on 4 specs. They match on 10 specs, including connection type, sample rate and bit depth. Two audio interfaces from SSL and Universal Audio, each taking a different approach to audio quality and I/O flexibility.
Which is better for streaming, SSL 2+ USB Audio Interface or Universal Audio Volt 2?
Get the SSL 2+ USB Audio Interface, narrowly. The SSL 2+ USB Audio Interface wins Monitoring and Connectivity — but only just, and the rest of the chart is close.
What do the SSL 2+ USB Audio Interface and Universal Audio Volt 2 have in common?
Both share 10 specifications in the catalog, including connection type (usb-c, xlr, trs), sample rate (192kHz), bit depth (24-bit) and phantom power (Yes), among others. None of those is a reason to pick one over the other.