Behringer U-PHORIA UMC22 vs Mackie Onyx Artist 1x2
Behringer U-PHORIA UMC22 vs Mackie Onyx Artist 1x2 compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
Behringer U-PHORIA UMC22 or Mackie Onyx Artist 1x2? Get the Mackie Onyx Artist 1x2, narrowly.
The Mackie Onyx Artist 1x2 wins Audio Resolution — but only just, and the rest of the chart is close. It is the pricier of the two at $199, so the Behringer U-PHORIA UMC22 stays the pick if $139.01 matters more than those specs.
At a Glance
Where each one actually leads
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | Behringer U-PHORIA UMC22 | Mackie Onyx Artist 1x2 |
|---|---|---|
| Audio Resolution | 6.3/10 | 10/10 |
| Mic Inputs | 10/10 | 10/10 |
| Monitoring | 10/10 | 10/10 |
| Creator Features | 10/10 | 10/10 |
| Connectivity | 10/10 | 10/10 |
| Power | 10/10 | 10/10 |
The Split
What each one wins
Behringer U-PHORIA UMC22
Budget 2x2 USB audio interface with MIDAS mic preamp for beginner recording and streaming setups.
It gives up sample rate to the Mackie Onyx Artist 1x2. It is the cheaper of the two, by $139.01.
Leads on
- Nothing on the spec sheet goes this one’s way.
Mackie Onyx Artist 1x2
Desktop audio interface intended for creator workflows, microphone input, monitoring, and clean signal routing.
On paper the Mackie Onyx Artist 1x2 takes sample rate (192kHz, +144kHz). It concedes nothing measurable on the sheet. That costs $139.01 more than the Behringer U-PHORIA UMC22.
Leads on
-
Sample Rate +144kHz192kHz48kHz
Higher sample rates capture more audio detail — important for professional recording and mixing.
Where they’re identical
These 10 specs are the same on both of them, so none of it is part of the decision.
- Bit Depth 24-bit
- Phantom Power Yes
- XLR Inputs 1
- Headphone Outputs 1
- Direct Monitoring Yes
- Loopback No
- ADAT Expansion No
- MIDI I/O None
- Bus Powered Yes
- TRS Outputs 2
The Record
19 specs, grouped by area
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
Who each one is for
The Mackie Onyx Artist 1x2 is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
Frequently Asked Questions
What is the main difference between Behringer U-PHORIA UMC22 and Mackie Onyx Artist 1x2?
The largest gap is sample rate, where the Mackie Onyx Artist 1x2 leads — 192kHz against 48kHz. Across the catalog's specification sheet the two differ on 1 spec. They match on 10 specs, including bit depth, phantom power and XLR inputs. Two audio interfaces from Behringer and Mackie, each taking a different approach to audio quality and I/O flexibility.
Which is better for streaming, Behringer U-PHORIA UMC22 or Mackie Onyx Artist 1x2?
Get the Mackie Onyx Artist 1x2, narrowly. The Mackie Onyx Artist 1x2 wins Audio Resolution — but only just, and the rest of the chart is close. It is the pricier of the two at $199, so the Behringer U-PHORIA UMC22 stays the pick if $139.01 matters more than those specs.
What do the Behringer U-PHORIA UMC22 and Mackie Onyx Artist 1x2 have in common?
Both share 10 specifications in the catalog, including bit depth (24-bit), phantom power (Yes), XLR inputs (1) and headphone outputs (1), among others. None of those is a reason to pick one over the other.
Is the Mackie Onyx Artist 1x2 worth the extra $139 over the Behringer U-PHORIA UMC22?
The Mackie Onyx Artist 1x2 costs $199.00 against $59.99, a difference of $139. The premium buys sample rate (192kHz). Whether that is worth it depends on which of those you would actually use.