Audio-Technica AT-UMX3 Desktop Mixer vs M-Audio M-Track 2x2M-C
Audio-Technica AT-UMX3 Desktop Mixer vs M-Audio M-Track 2x2M-C compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
Audio-Technica AT-UMX3 Desktop Mixer or M-Audio M-Track 2x2M-C? Get the M-Audio M-Track 2x2M-C, narrowly.
The M-Audio M-Track 2x2M-C wins Audio Resolution and Mic Inputs — but only just, and the rest of the chart is close.
Unless…
- You need creator features — get the Audio-Technica AT-UMX3 Desktop Mixer.
At a Glance
Where each one actually leads
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | Audio-Technica AT-UMX3 Desktop Mixer | M-Audio M-Track 2x2M-C |
|---|---|---|
| Audio Resolution | 7.5/10 | 10/10 |
| Mic Inputs | 5/10 | 10/10 |
| Monitoring | 10/10 | 10/10 |
| Creator Features | 10/10 | 5/10 |
| Power | 10/10 | 10/10 |
| Value | 10/10 | 10/10 |
The Split
What each one wins
Audio-Technica AT-UMX3 Desktop Mixer
Compact desktop streaming mixer/interface with tactile controls for mic and monitor balancing.
On paper the Audio-Technica AT-UMX3 Desktop Mixer takes loopback (Yes). It gives up sample rate and XLR inputs to the M-Audio M-Track 2x2M-C. The two are priced the same, so price does not decide it.
Leads on
-
LoopbackYesNo
Loopback routes computer audio back into the stream without a second interface or cable.
M-Audio M-Track 2x2M-C
Desktop audio interface intended for creator workflows, microphone input, monitoring, and clean signal routing.
On paper the M-Audio M-Track 2x2M-C takes sample rate (192kHz, +144kHz) and XLR inputs (2, +1). It gives up loopback to the Audio-Technica AT-UMX3 Desktop Mixer. The two are priced the same, so price does not decide it.
Leads on
-
Sample Rate +144kHz192kHz48kHz
Higher sample rates capture more audio detail — important for professional recording and mixing.
-
XLR Inputs +121
More XLR inputs let you record multiple microphones simultaneously.
Where they’re identical
These 8 specs are the same on both of them, so none of it is part of the decision.
- Connection Type usb-c, xlr, trs
- Bit Depth 24-bit
- Max Sample Rate 192kHz
- Phantom Power Yes
- Headphone Outputs 1
- Direct Monitoring Yes
- ADAT Expansion No
- Bus Powered Yes
The Record
19 specs, grouped by area
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
Who each one is for
The M-Audio M-Track 2x2M-C is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
Frequently Asked Questions
What is the main difference between Audio-Technica AT-UMX3 Desktop Mixer and M-Audio M-Track 2x2M-C?
The clearest difference is loopback, which the Audio-Technica AT-UMX3 Desktop Mixer has and the M-Audio M-Track 2x2M-C does not. Across the catalog's specification sheet the two differ on 3 specs. They match on 8 specs, including connection type, bit depth and max sample rate. Two audio interfaces from Audio-Technica and M-Audio, each taking a different approach to audio quality and I/O flexibility.
Which is better for streaming, Audio-Technica AT-UMX3 Desktop Mixer or M-Audio M-Track 2x2M-C?
Get the M-Audio M-Track 2x2M-C, narrowly. The M-Audio M-Track 2x2M-C wins Audio Resolution and Mic Inputs — but only just, and the rest of the chart is close.
What do the Audio-Technica AT-UMX3 Desktop Mixer and M-Audio M-Track 2x2M-C have in common?
Both share 8 specifications in the catalog, including connection type (usb-c, xlr, trs), bit depth (24-bit), max sample rate (192kHz) and phantom power (Yes), among others. None of those is a reason to pick one over the other.