Arturia MiniFuse 2 vs Mackie Onyx Artist 1x2
Arturia MiniFuse 2 vs Mackie Onyx Artist 1x2 compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
Arturia MiniFuse 2 or Mackie Onyx Artist 1x2? Get the Arturia MiniFuse 2.
The Arturia MiniFuse 2 wins Mic Inputs and Creator Features. It is also the cheaper of the two, by $49.01.
At a Glance
Where each one actually leads
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | Arturia MiniFuse 2 | Mackie Onyx Artist 1x2 |
|---|---|---|
| Audio Resolution | 10/10 | 10/10 |
| Mic Inputs | 10/10 | 5/10 |
| Monitoring | 10/10 | 10/10 |
| Creator Features | 10/10 | 5/10 |
| Connectivity | 10/10 | 10/10 |
| Power | 10/10 | 10/10 |
The Split
What each one wins
Arturia MiniFuse 2
USB-C audio interface with dual combo inputs, direct monitoring, and creator-ready loopback support.
On paper the Arturia MiniFuse 2 takes loopback (Yes) and XLR inputs (2, +1). It concedes nothing measurable on the sheet. It is the cheaper of the two, by $49.01.
Leads on
-
LoopbackYesNo
Loopback routes computer audio back into the stream without a second interface or cable.
-
XLR Inputs +121
More XLR inputs let you record multiple microphones simultaneously.
Mackie Onyx Artist 1x2
Desktop audio interface intended for creator workflows, microphone input, monitoring, and clean signal routing.
It gives up loopback and XLR inputs to the Arturia MiniFuse 2. That costs $49.01 more than the Arturia MiniFuse 2.
Leads on
- Nothing on the spec sheet goes this one’s way.
Where they’re identical
These 9 specs are the same on both of them, so none of it is part of the decision.
- Connection Type usb-c, xlr, trs
- Sample Rate 192kHz
- Bit Depth 24-bit
- Phantom Power Yes
- Headphone Outputs 1
- Direct Monitoring Yes
- ADAT Expansion No
- Bus Powered Yes
- TRS Outputs 2
The Record
19 specs, grouped by area
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
Who each one is for
The Arturia MiniFuse 2 is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
Frequently Asked Questions
What is the main difference between Arturia MiniFuse 2 and Mackie Onyx Artist 1x2?
The clearest difference is loopback, which the Arturia MiniFuse 2 has and the Mackie Onyx Artist 1x2 does not. Across the catalog's specification sheet the two differ on 2 specs. They match on 9 specs, including connection type, sample rate and bit depth. Two audio interfaces from Arturia and Mackie, each taking a different approach to audio quality and I/O flexibility.
Which is better for streaming, Arturia MiniFuse 2 or Mackie Onyx Artist 1x2?
Get the Arturia MiniFuse 2. The Arturia MiniFuse 2 wins Mic Inputs and Creator Features. It is also the cheaper of the two, by $49.01.
What do the Arturia MiniFuse 2 and Mackie Onyx Artist 1x2 have in common?
Both share 9 specifications in the catalog, including connection type (usb-c, xlr, trs), sample rate (192kHz), bit depth (24-bit) and phantom power (Yes), among others. None of those is a reason to pick one over the other.
Is the Mackie Onyx Artist 1x2 worth the extra $49 over the Arturia MiniFuse 2?
The Mackie Onyx Artist 1x2 costs $199.00 against $149.99, a difference of $49. On the catalog's specifications it does not lead the Arturia MiniFuse 2 anywhere, so the premium buys brand, build or something the catalog does not record. Whether that is worth it depends on which of those you would actually use.