Universal Audio Volt 276 USB-C Interface vs Audio-Technica AT-UMX3 Desktop Mixer

Universal Audio Volt 276 USB-C Interface vs Audio-Technica AT-UMX3 Desktop Mixer compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.

Universal Audio Volt 276 USB-C Interface
Universal Audio
Universal Audio Volt 276 USB-C Interface
$189
Audio-Technica AT-UMX3 Desktop Mixer
Audio-Technica
Audio-Technica AT-UMX3 Desktop Mixer
$199

The Ruling

Universal Audio Volt 276 USB-C Interface or Audio-Technica AT-UMX3 Desktop Mixer? Get the Universal Audio Volt 276 USB-C Interface, narrowly.

The Universal Audio Volt 276 USB-C Interface wins Audio Resolution and Mic Inputs — but only just, and the rest of the chart is close. It is also the cheaper of the two, by $10.

Check price on Amazon

Unless…

At a Glance

Where each one actually leads

Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.

CategoryUniversal Audio Volt 276 USB-C InterfaceAudio-Technica AT-UMX3 Desktop Mixer
Audio Resolution10/107.5/10
Mic Inputs10/105/10
Monitoring10/1010/10
Creator Features5/1010/10
Power10/1010/10
Value10/109.5/10

The Split

What each one wins

Universal Audio Volt 276 USB-C Interface

Desktop audio interface intended for creator workflows, microphone input, monitoring, and clean signal routing.

On paper the Universal Audio Volt 276 USB-C Interface takes sample rate (192kHz, +144kHz) and XLR inputs (2, +1). It gives up loopback to the Audio-Technica AT-UMX3 Desktop Mixer. It is the cheaper of the two, by $10.00.

Leads on

  • Sample Rate +144kHz
    192kHz
    48kHz

    Higher sample rates capture more audio detail — important for professional recording and mixing.

  • XLR Inputs +1
    2
    1

    More XLR inputs let you record multiple microphones simultaneously.

Audio-Technica AT-UMX3 Desktop Mixer

Compact desktop streaming mixer/interface with tactile controls for mic and monitor balancing.

On paper the Audio-Technica AT-UMX3 Desktop Mixer takes loopback (Yes). It gives up sample rate and XLR inputs to the Universal Audio Volt 276 USB-C Interface. That costs $10.00 more than the Universal Audio Volt 276 USB-C Interface.

Leads on

  • Loopback
    Yes
    No

    Loopback routes computer audio back into the stream without a second interface or cable.

Where they’re identical

These 8 specs are the same on both of them, so none of it is part of the decision.

  • Connection Type usb-c, xlr, trs
  • Bit Depth 24-bit
  • Max Sample Rate 192kHz
  • Phantom Power Yes
  • Headphone Outputs 1
  • Direct Monitoring Yes
  • ADAT Expansion No
  • Bus Powered Yes

The Record

19 specs, grouped by area

Full specification comparison of Universal Audio Volt 276 USB-C Interface and Audio-Technica AT-UMX3 Desktop Mixer, grouped by area.
Specification
Universal Audio
Universal Audio Volt 276 USB-C Interface
Audio-Technica
Audio-Technica AT-UMX3 Desktop Mixer
Audio ResolutionUniversal Audio Volt 276 USB-C Interface
Sample Rate✓ 192kHz48kHz
Max Sample Rate192kHz192kHz
Bit Depth24-bit24-bit
PreampsNot enough data
Preamp Gain55dBno data
Dynamic Rangeno datano data
Mic InputsUniversal Audio Volt 276 USB-C Interface
XLR Inputs✓ 21
MonitoringEven
Headphone Outputs11
Direct MonitoringYesYes
Creator FeaturesAudio-Technica AT-UMX3 Desktop Mixer
LoopbackNo✓ Yes
ADAT ExpansionNoNo
MIDI I/OIn/OutNone
Bundled Softwareno datano data
ConnectivityNot enough data
TRS Outputs4no data
Connection Typeusb-c, xlr, trsusb-c, xlr, trs
PowerEven
Bus PoweredYesYes
Phantom PowerYesYes
BuildNot enough data
Dimensionsno datano data
Weightno datano data
CompatibilityNot enough data
Operating Systemwindows, macosno data

A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.

Bottom Line

Who each one is for

The Universal Audio Volt 276 USB-C Interface is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.

Our pick
Best ValueMost ConnectivityBest for Multi-mic

At $189.00, the Universal Audio Volt 276 USB-C Interface is the most affordable option in this comparison. It leads in sample rate (192kHz) and XLR inputs (2). Offers the most spec advantages per dollar in this comparison.

  • + Higher sample rate (192kHz vs 48kHz)
  • + More XLR inputs (2 vs 1)
  • × Weaker loopback (No vs Yes)

Also worth knowing

  • ✓ You want 192kHz sample rate for higher-resolution audio
  • ✓ You need 2 XLR inputs for recording multiple sources
  • ✓ Budget is your top priority — $10.00 less than the priciest option
  • ✓ You have MIDI gear to plug in without a separate adapter

Look elsewhere if

  • × You need the best loopback available

Best for value-focused buyers, complex setup builders, multi-person podcasts.

The alternative
Easiest SetupPortability Pick

At $199.00, the Audio-Technica AT-UMX3 Desktop Mixer is the most expensive option and doesn't clearly outspec the cheaper alternatives. It leads in loopback (Yes). Fewer ports and inputs — plug in and go.

  • + Better loopback (Yes vs No)
  • × Lower sample rate (48kHz vs 192kHz)
  • × Fewer XLR inputs (1 vs 2)

Also worth knowing

  • ✓ You want the stronger loopback (Yes)
  • ✓ You need gear you can easily take on the go
  • ✓ You want to capture computer audio without a second interface

Look elsewhere if

  • × You're on a tight budget — save $10.00 with a cheaper option
  • × You need the highest sample rate available (192kHz)
  • × You plan to record multiple microphones simultaneously

Best for beginners, mobile creators, space-constrained setups.

Frequently Asked Questions

What is the main difference between Universal Audio Volt 276 USB-C Interface and Audio-Technica AT-UMX3 Desktop Mixer?

The clearest difference is loopback, which the Audio-Technica AT-UMX3 Desktop Mixer has and the Universal Audio Volt 276 USB-C Interface does not. Across the catalog's specification sheet the two differ on 3 specs. They match on 8 specs, including connection type, bit depth and max sample rate. Two audio interfaces from Universal Audio and Audio-Technica, each taking a different approach to audio quality and I/O flexibility.

Which is better for streaming, Universal Audio Volt 276 USB-C Interface or Audio-Technica AT-UMX3 Desktop Mixer?

Get the Universal Audio Volt 276 USB-C Interface, narrowly. The Universal Audio Volt 276 USB-C Interface wins Audio Resolution and Mic Inputs — but only just, and the rest of the chart is close. It is also the cheaper of the two, by $10.

What do the Universal Audio Volt 276 USB-C Interface and Audio-Technica AT-UMX3 Desktop Mixer have in common?

Both share 8 specifications in the catalog, including connection type (usb-c, xlr, trs), bit depth (24-bit), max sample rate (192kHz) and phantom power (Yes), among others. None of those is a reason to pick one over the other.

Related Comparisons

Universal Audio Volt 276 USB-C Interface vs Universal Audio Volt 2 Compare → Audio-Technica AT-UMX3 Desktop Mixer vs EVO 4x4 USB-C Audio Interface Compare → Universal Audio Volt 276 USB-C Interface vs EVO 4x4 USB-C Audio Interface Compare → Audio-Technica AT-UMX3 Desktop Mixer vs M-Audio M-Track 2x2M-C Compare → Universal Audio Volt 276 USB-C Interface vs M-Audio M-Track 2x2M-C Compare → Audio-Technica AT-UMX3 Desktop Mixer vs Mackie Onyx Artist 1x2 Compare →