NearStream USB Audio Interface vs Universal Audio Volt 2
NearStream USB Audio Interface vs Universal Audio Volt 2 compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
NearStream USB Audio Interface or Universal Audio Volt 2? Get the Universal Audio Volt 2, narrowly.
The Universal Audio Volt 2 wins Audio Resolution — but only just, and the rest of the chart is close. It is the pricier of the two at $189, so the NearStream USB Audio Interface stays the pick if $60 matters more than those specs.
At a Glance
Where each one actually leads
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | NearStream USB Audio Interface | Universal Audio Volt 2 |
|---|---|---|
| Audio Resolution | 6.3/10 | 10/10 |
| Mic Inputs | 10/10 | 10/10 |
| Creator Features | 10/10 | 10/10 |
| Power | 10/10 | 10/10 |
| Value | 10/10 | 6.8/10 |
The Split
What each one wins
NearStream USB Audio Interface
Creator-focused interface with monitoring and loopback options for livestream and podcast routing.
It gives up sample rate to the Universal Audio Volt 2. It is the cheaper of the two, by $60.00.
Leads on
- Nothing on the spec sheet goes this one’s way.
Universal Audio Volt 2
2-in/2-out USB audio interface with high-quality preamps and analog-inspired tone shaping.
On paper the Universal Audio Volt 2 takes sample rate (192kHz, +144kHz). It concedes nothing measurable on the sheet. That costs $60.00 more than the NearStream USB Audio Interface.
Leads on
-
Sample Rate +144kHz192kHz48kHz
Higher sample rates capture more audio detail — important for professional recording and mixing.
Where they’re identical
These 6 specs are the same on both of them, so none of it is part of the decision.
- Connection Type usb-c, xlr, trs
- Bit Depth 24-bit
- Phantom Power Yes
- XLR Inputs 2
- ADAT Expansion No
- Bus Powered Yes
The Record
19 specs, grouped by area
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
Who each one is for
The Universal Audio Volt 2 is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
Frequently Asked Questions
What is the main difference between NearStream USB Audio Interface and Universal Audio Volt 2?
The largest gap is sample rate, where the Universal Audio Volt 2 leads — 192kHz against 48kHz. Across the catalog's specification sheet the two differ on 1 spec. They match on 6 specs, including connection type, bit depth and phantom power. Two audio interfaces from NearStream and Universal Audio, each taking a different approach to audio quality and I/O flexibility.
Which is better for streaming, NearStream USB Audio Interface or Universal Audio Volt 2?
Get the Universal Audio Volt 2, narrowly. The Universal Audio Volt 2 wins Audio Resolution — but only just, and the rest of the chart is close. It is the pricier of the two at $189, so the NearStream USB Audio Interface stays the pick if $60 matters more than those specs.
What do the NearStream USB Audio Interface and Universal Audio Volt 2 have in common?
Both share 6 specifications in the catalog, including connection type (usb-c, xlr, trs), bit depth (24-bit), phantom power (Yes) and XLR inputs (2), among others. None of those is a reason to pick one over the other.
Is the Universal Audio Volt 2 worth the extra $60 over the NearStream USB Audio Interface?
The Universal Audio Volt 2 costs $189.00 against $129.00, a difference of $60. The premium buys sample rate (192kHz). Whether that is worth it depends on which of those you would actually use.