Audient EVO 16 Audio Interface vs Universal Audio Volt 2
Audient EVO 16 Audio Interface vs Universal Audio Volt 2 compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
Audient EVO 16 Audio Interface or Universal Audio Volt 2? Get the Audient EVO 16 Audio Interface.
The Audient EVO 16 Audio Interface wins Monitoring, Creator Features and Connectivity. It is also the cheaper of the two, by $60.
Unless…
- You need audio resolution — get the Universal Audio Volt 2.
At a Glance
Where each one actually leads
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | Audient EVO 16 Audio Interface | Universal Audio Volt 2 |
|---|---|---|
| Audio Resolution | 7.5/10 | 10/10 |
| Preamps | 10/10 | 9.4/10 |
| Mic Inputs | 10/10 | 10/10 |
| Monitoring | 10/10 | 7.5/10 |
| Creator Features | 10/10 | 0/10 |
| Connectivity | 10/10 | 2.5/10 |
The Split
What each one wins
Audient EVO 16 Audio Interface
Desktop audio interface intended for creator workflows, microphone input, monitoring, and clean signal routing.
On paper the Audient EVO 16 Audio Interface takes loopback (Yes), ADAT expansion (Yes), TRS outputs (8, +6) and headphone outputs (2, +1). It also leads on dynamic range and preamp gain. It gives up bus powered and sample rate to the Universal Audio Volt 2. It is the cheaper of the two, by $60.00.
Leads on
-
LoopbackYesNo
Loopback routes computer audio back into the stream without a second interface or cable.
-
ADAT ExpansionYesNo
ADAT lets you add eight more inputs later instead of replacing the interface.
-
TRS Outputs +682
More TRS outputs allow routing to studio monitors and outboard gear.
-
Headphone Outputs +121
A second headphone output lets a guest monitor without a splitter.
-
Dynamic Range +9dB121dB112dB
Wider converter dynamic range means less noise between the quietest and loudest parts of a take.
-
Preamp Gain +3dB58dB55dB
More gain drives quiet dynamic microphones like the SM7B without a separate booster.
Universal Audio Volt 2
2-in/2-out USB audio interface with high-quality preamps and analog-inspired tone shaping.
On paper the Universal Audio Volt 2 takes bus powered (Yes) and sample rate (192kHz, +96kHz). It gives up loopback and ADAT expansion to the Audient EVO 16 Audio Interface. That costs $60.00 more than the Audient EVO 16 Audio Interface.
Leads on
-
Bus PoweredYesNo
Bus power means the interface runs off USB alone — no wall adapter to carry or find a socket for.
-
Sample Rate +96kHz192kHz96kHz
Higher sample rates capture more audio detail — important for professional recording and mixing.
Where they’re identical
These 5 specs are the same on both of them, so none of it is part of the decision.
- Connection Type usb-c, xlr, trs
- Bit Depth 24-bit
- Phantom Power Yes
- XLR Inputs 2
- Direct Monitoring Yes
The Record
19 specs, grouped by area
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
Who each one is for
The Audient EVO 16 Audio Interface is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
Frequently Asked Questions
What is the main difference between Audient EVO 16 Audio Interface and Universal Audio Volt 2?
The clearest difference is loopback, which the Audient EVO 16 Audio Interface has and the Universal Audio Volt 2 does not. Across the catalog's specification sheet the two differ on 8 specs. They match on 5 specs, including connection type, bit depth and phantom power. Two audio interfaces from Audient and Universal Audio, each taking a different approach to audio quality and I/O flexibility.
Which is better for streaming, Audient EVO 16 Audio Interface or Universal Audio Volt 2?
Get the Audient EVO 16 Audio Interface. The Audient EVO 16 Audio Interface wins Monitoring, Creator Features and Connectivity. It is also the cheaper of the two, by $60.
What do the Audient EVO 16 Audio Interface and Universal Audio Volt 2 have in common?
Both share 5 specifications in the catalog, including connection type (usb-c, xlr, trs), bit depth (24-bit), phantom power (Yes) and XLR inputs (2), among others. None of those is a reason to pick one over the other.
Is the Universal Audio Volt 2 worth the extra $60 over the Audient EVO 16 Audio Interface?
The Universal Audio Volt 2 costs $189.00 against $129.00, a difference of $60. The premium buys bus powered (Yes) and sample rate (192kHz). Whether that is worth it depends on which of those you would actually use.