Arturia MiniFuse 2 vs Focusrite Scarlett 2i2 (3rd Gen)
Arturia MiniFuse 2 vs Focusrite Scarlett 2i2 (3rd Gen) compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
Arturia MiniFuse 2 or Focusrite Scarlett 2i2 (3rd Gen)? It is a toss-up.
Neither one leads on more of the chart than the other — the Arturia MiniFuse 2 takes Creator Features, the Focusrite Scarlett 2i2 (3rd Gen) takes Preamps — and they are priced the same. Buy for the axis you actually use.
Unless…
- You need creator features — get the Arturia MiniFuse 2.
- You need preamps — get the Focusrite Scarlett 2i2 (3rd Gen).
At a Glance
Where each one actually leads
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | Arturia MiniFuse 2 | Focusrite Scarlett 2i2 (3rd Gen) |
|---|---|---|
| Audio Resolution | 10/10 | 10/10 |
| Preamps | 8.5/10 | 10/10 |
| Mic Inputs | 10/10 | 10/10 |
| Monitoring | 10/10 | 10/10 |
| Creator Features | 10/10 | 5/10 |
| Connectivity | 10/10 | 10/10 |
The Split
What each one wins
Arturia MiniFuse 2
USB-C audio interface with dual combo inputs, direct monitoring, and creator-ready loopback support.
On paper the Arturia MiniFuse 2 takes loopback (Yes). It gives up dynamic range to the Focusrite Scarlett 2i2 (3rd Gen). The two are priced the same, so price does not decide it.
Leads on
-
LoopbackYesNo
Loopback routes computer audio back into the stream without a second interface or cable.
Focusrite Scarlett 2i2 (3rd Gen)
Popular 2-in/2-out USB audio interface with low-noise preamps and direct monitoring.
On paper the Focusrite Scarlett 2i2 (3rd Gen) takes dynamic range (111dB, +1dB). It gives up loopback to the Arturia MiniFuse 2. The two are priced the same, so price does not decide it.
Leads on
-
Dynamic Range +1dB111dB110dB
Wider converter dynamic range means less noise between the quietest and loudest parts of a take.
Where they’re identical
These 11 specs are the same on both of them, so none of it is part of the decision.
- Connection Type usb-c, xlr, trs
- Sample Rate 192kHz
- Bit Depth 24-bit
- Preamp Gain 56dB
- Phantom Power Yes
- XLR Inputs 2
- Headphone Outputs 1
- Direct Monitoring Yes
- ADAT Expansion No
- Bus Powered Yes
- TRS Outputs 2
The Record
19 specs, grouped by area
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
Who each one is for
Neither product wins outright on the specs the catalog holds, so the choice comes down to which set of strengths matches your work.
Frequently Asked Questions
What is the main difference between Arturia MiniFuse 2 and Focusrite Scarlett 2i2 (3rd Gen)?
The clearest difference is loopback, which the Arturia MiniFuse 2 has and the Focusrite Scarlett 2i2 (3rd Gen) does not. Across the catalog's specification sheet the two differ on 2 specs. They match on 11 specs, including connection type, sample rate and bit depth. Two audio interfaces from Arturia and Focusrite, each taking a different approach to audio quality and I/O flexibility.
Which is better for streaming, Arturia MiniFuse 2 or Focusrite Scarlett 2i2 (3rd Gen)?
It is a toss-up. Neither one leads on more of the chart than the other — the Arturia MiniFuse 2 takes Creator Features, the Focusrite Scarlett 2i2 (3rd Gen) takes Preamps — and they are priced the same. Buy for the axis you actually use.
What do the Arturia MiniFuse 2 and Focusrite Scarlett 2i2 (3rd Gen) have in common?
Both share 11 specifications in the catalog, including connection type (usb-c, xlr, trs), sample rate (192kHz), bit depth (24-bit) and preamp gain (56dB), among others. None of those is a reason to pick one over the other.