XTUGA 4-Channel Audio Mixer vs Mackie ProFX6v3+
XTUGA 4-Channel Audio Mixer vs Mackie ProFX6v3+ compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
XTUGA 4-Channel Audio Mixer or Mackie ProFX6v3+? Get the Mackie ProFX6v3+, narrowly.
The Mackie ProFX6v3+ wins Audio Resolution — but only just, and the rest of the chart is close. It is the pricier of the two at $229, so the XTUGA 4-Channel Audio Mixer stays the pick if $150 matters more than those specs.
At a Glance
Where each one actually leads
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | XTUGA 4-Channel Audio Mixer | Mackie ProFX6v3+ |
|---|---|---|
| Audio Resolution | 6.3/10 | 10/10 |
| Channels | 10/10 | 10/10 |
| Value | 10/10 | 3.4/10 |
The Split
What each one wins
XTUGA 4-Channel Audio Mixer
Entry-level compact mixer with basic channel controls for voice and music routing.
It gives up sample rate to the Mackie ProFX6v3+. It is the cheaper of the two, by $150.00.
Leads on
- Nothing on the spec sheet goes this one’s way.
Mackie ProFX6v3+
Creator mixer with Onyx preamps and USB interface features for streaming and recording.
On paper the Mackie ProFX6v3+ takes sample rate (192kHz, +144kHz). It concedes nothing measurable on the sheet. That costs $150.00 more than the XTUGA 4-Channel Audio Mixer.
Leads on
-
Sample Rate +144kHz192kHz48kHz
Higher sample rate processing preserves audio fidelity through the mixer.
Where they’re identical
These 3 specs are the same on both of them, so none of it is part of the decision.
- Bit Depth 24-bit
- Phantom Power Yes
- XLR Inputs 2
The Record
22 specs, grouped by area
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
Who each one is for
The Mackie ProFX6v3+ is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
Frequently Asked Questions
What is the main difference between XTUGA 4-Channel Audio Mixer and Mackie ProFX6v3+?
The largest gap is sample rate, where the Mackie ProFX6v3+ leads — 192kHz against 48kHz. Across the catalog's specification sheet the two differ on 1 spec. They match on 3 specs, including bit depth, phantom power and XLR inputs. Two audio mixers from XTUGA and Mackie, each taking a different approach to channel count and routing flexibility.
Which is better for streaming, XTUGA 4-Channel Audio Mixer or Mackie ProFX6v3+?
Get the Mackie ProFX6v3+, narrowly. The Mackie ProFX6v3+ wins Audio Resolution — but only just, and the rest of the chart is close. It is the pricier of the two at $229, so the XTUGA 4-Channel Audio Mixer stays the pick if $150 matters more than those specs.
What do the XTUGA 4-Channel Audio Mixer and Mackie ProFX6v3+ have in common?
Both share 3 specifications in the catalog, including bit depth (24-bit), phantom power (Yes) and XLR inputs (2). None of those is a reason to pick one over the other.
Is the Mackie ProFX6v3+ worth the extra $150 over the XTUGA 4-Channel Audio Mixer?
The Mackie ProFX6v3+ costs $229.00 against $79.00, a difference of $150. The premium buys sample rate (192kHz). Whether that is worth it depends on which of those you would actually use.