Blackmagic Design ATEM Mini vs Elgato HD60 X
Blackmagic Design ATEM Mini vs Elgato HD60 X compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
Blackmagic Design ATEM Mini or Elgato HD60 X? Get the Elgato HD60 X, narrowly.
The Elgato HD60 X wins Passthrough — but only just, and the rest of the chart is close. It is the pricier of the two at $179.99, so the Blackmagic Design ATEM Mini stays the pick if $30.99 matters more than those specs.
At a Glance
Where each one actually leads
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | Blackmagic Design ATEM Mini | Elgato HD60 X |
|---|---|---|
| Capture Quality | 10/10 | 10/10 |
| Passthrough | 2.5/10 | 10/10 |
| Value | 10/10 | 8.3/10 |
The Split
What each one wins
Blackmagic Design ATEM Mini
Video capture device for gameplay, cameras, or HDMI sources with creator-friendly passthrough and recording support.
It gives up passthrough resolution to the Elgato HD60 X. It is the cheaper of the two, by $30.99.
Leads on
- Nothing on the spec sheet goes this one’s way.
Elgato HD60 X
Widely used external USB capture card with low-latency gameplay passthrough.
On paper the Elgato HD60 X takes passthrough resolution (4K60 HDR10 / 1440p120 / 1080p240). It concedes nothing measurable on the sheet. That costs $30.99 more than the Blackmagic Design ATEM Mini.
Leads on
-
Passthrough Resolution4K60 HDR10 / 1440p120 / 1080p2401080p60
Where they’re identical
These 2 specs are the same on both of them, so none of it is part of the decision.
- Connection Type usb-c, hdmi
- Capture Resolution 1080p60
The Record
14 specs, grouped by area
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
Who each one is for
The Elgato HD60 X is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
Frequently Asked Questions
What is the main difference between Blackmagic Design ATEM Mini and Elgato HD60 X?
The largest gap is passthrough resolution, where the Elgato HD60 X leads — 4K60 HDR10 / 1440p120 / 1080p240 against 1080p60. Across the catalog's specification sheet the two differ on 1 spec. They match on 2 specs, including connection type and capture resolution. Two capture cards from Blackmagic Design and Elgato, each taking a different approach to video quality and latency.
Which is better for streaming, Blackmagic Design ATEM Mini or Elgato HD60 X?
Get the Elgato HD60 X, narrowly. The Elgato HD60 X wins Passthrough — but only just, and the rest of the chart is close. It is the pricier of the two at $179.99, so the Blackmagic Design ATEM Mini stays the pick if $30.99 matters more than those specs.
Is the Elgato HD60 X worth the extra $31 over the Blackmagic Design ATEM Mini?
The Elgato HD60 X costs $179.99 against $149.00, a difference of $31. The premium buys passthrough resolution (4K60 HDR10 / 1440p120 / 1080p240). Whether that is worth it depends on which of those you would actually use.