Arturia MiniFuse 2 vs Steinberg UR12C Audio Interface
Arturia MiniFuse 2 vs Steinberg UR12C Audio Interface compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.
The Ruling
Arturia MiniFuse 2 or Steinberg UR12C Audio Interface? Get the Arturia MiniFuse 2, narrowly.
The Arturia MiniFuse 2 wins Mic Inputs — but only just, and the rest of the chart is close. It is also the cheaper of the two, by $49.01.
At a Glance
Where each one actually leads
Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.
| Category | Arturia MiniFuse 2 | Steinberg UR12C Audio Interface |
|---|---|---|
| Audio Resolution | 10/10 | 10/10 |
| Mic Inputs | 10/10 | 5/10 |
| Monitoring | 10/10 | 10/10 |
| Creator Features | 10/10 | 10/10 |
| Connectivity | 10/10 | 10/10 |
| Power | 10/10 | 10/10 |
The Split
What each one wins
Arturia MiniFuse 2
USB-C audio interface with dual combo inputs, direct monitoring, and creator-ready loopback support.
On paper the Arturia MiniFuse 2 takes XLR inputs (2, +1). It concedes nothing measurable on the sheet. It is the cheaper of the two, by $49.01.
Leads on
-
XLR Inputs +121
More XLR inputs let you record multiple microphones simultaneously.
Steinberg UR12C Audio Interface
Desktop audio interface intended for creator workflows, microphone input, monitoring, and clean signal routing.
It gives up XLR inputs to the Arturia MiniFuse 2. That costs $49.01 more than the Arturia MiniFuse 2.
Leads on
- Nothing on the spec sheet goes this one’s way.
Where they’re identical
These 10 specs are the same on both of them, so none of it is part of the decision.
- Connection Type usb-c, xlr, trs
- Sample Rate 192kHz
- Bit Depth 24-bit
- Phantom Power Yes
- Headphone Outputs 1
- Direct Monitoring Yes
- Loopback Yes
- ADAT Expansion No
- Bus Powered Yes
- TRS Outputs 2
The Record
19 specs, grouped by area
A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.
Bottom Line
Who each one is for
The Arturia MiniFuse 2 is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.
Frequently Asked Questions
What is the main difference between Arturia MiniFuse 2 and Steinberg UR12C Audio Interface?
The largest gap is XLR inputs, where the Arturia MiniFuse 2 leads — 2 against 1. Across the catalog's specification sheet the two differ on 1 spec. They match on 10 specs, including connection type, sample rate and bit depth. Two audio interfaces from Arturia and Steinberg, each taking a different approach to audio quality and I/O flexibility.
Which is better for streaming, Arturia MiniFuse 2 or Steinberg UR12C Audio Interface?
Get the Arturia MiniFuse 2, narrowly. The Arturia MiniFuse 2 wins Mic Inputs — but only just, and the rest of the chart is close. It is also the cheaper of the two, by $49.01.
What do the Arturia MiniFuse 2 and Steinberg UR12C Audio Interface have in common?
Both share 10 specifications in the catalog, including connection type (usb-c, xlr, trs), sample rate (192kHz), bit depth (24-bit) and phantom power (Yes), among others. None of those is a reason to pick one over the other.
Is the Steinberg UR12C Audio Interface worth the extra $49 over the Arturia MiniFuse 2?
The Steinberg UR12C Audio Interface costs $199.00 against $149.99, a difference of $49. On the catalog's specifications it does not lead the Arturia MiniFuse 2 anywhere, so the premium buys brand, build or something the catalog does not record. Whether that is worth it depends on which of those you would actually use.