Arturia MiniFuse 2 vs Audient iD24

Arturia MiniFuse 2 vs Audient iD24 compared — specs, features, and which one to buy for your setup. See the full breakdown on CreatorConfig.

Arturia MiniFuse 2
Arturia
Arturia MiniFuse 2
$149.99
Audient iD24
Audient
Audient iD24
$399

The Ruling

Arturia MiniFuse 2 or Audient iD24? Get the Audient iD24.

The Audient iD24 wins Preamps, Monitoring, Creator Features and Connectivity. It is the pricier of the two at $399, so the Arturia MiniFuse 2 stays the pick if $249.01 matters more than those specs.

Check price on Amazon

Unless…

At a Glance

Where each one actually leads

Every axis is scored out of 10 from the catalog specs below. The scores are relative to the products on this page, so a 10 means “best of these”, not “perfect”, and two identical columns mean the catalog genuinely cannot separate them. Axes the catalog holds no figure for on both sides are left off entirely rather than guessed at.

CategoryArturia MiniFuse 2Audient iD24
Audio Resolution10/107.5/10
Preamps8.6/1010/10
Mic Inputs10/1010/10
Monitoring7.5/1010/10
Creator Features5/1010/10
Connectivity5/1010/10

The Split

What each one wins

Arturia MiniFuse 2

USB-C audio interface with dual combo inputs, direct monitoring, and creator-ready loopback support.

On paper the Arturia MiniFuse 2 takes sample rate (192kHz, +96kHz). It gives up ADAT expansion and headphone outputs to the Audient iD24. It is the cheaper of the two, by $249.01.

Leads on

  • Sample Rate +96kHz
    192kHz
    96kHz

    Higher sample rates capture more audio detail — important for professional recording and mixing.

Audient iD24

Pro-level USB-C audio interface with strong preamps, monitor control, and expandable I/O.

On paper the Audient iD24 takes ADAT expansion (Yes), headphone outputs (2, +1), TRS outputs (4, +2) and preamp gain (68dB, +12dB). It also leads on dynamic range. It gives up sample rate to the Arturia MiniFuse 2. That costs $249.01 more than the Arturia MiniFuse 2.

Leads on

  • ADAT Expansion
    Yes
    No

    ADAT lets you add eight more inputs later instead of replacing the interface.

  • Headphone Outputs +1
    2
    1

    A second headphone output lets a guest monitor without a splitter.

  • TRS Outputs +2
    4
    2

    More TRS outputs allow routing to studio monitors and outboard gear.

  • Preamp Gain +12dB
    68dB
    56dB

    More gain drives quiet dynamic microphones like the SM7B without a separate booster.

  • Dynamic Range +12dB
    122dB
    110dB

    Wider converter dynamic range means less noise between the quietest and loudest parts of a take.

Where they’re identical

These 7 specs are the same on both of them, so none of it is part of the decision.

  • Connection Type usb-c, xlr, trs
  • Bit Depth 24-bit
  • Phantom Power Yes
  • XLR Inputs 2
  • Direct Monitoring Yes
  • Loopback Yes
  • Bus Powered Yes

The Record

19 specs, grouped by area

Full specification comparison of Arturia MiniFuse 2 and Audient iD24, grouped by area.
Specification
Arturia
Arturia MiniFuse 2
Audient
Audient iD24
Audio ResolutionArturia MiniFuse 2
Sample Rate✓ 192kHz96kHz
Max Sample Rateno datano data
Bit Depth24-bit24-bit
PreampsAudient iD24
Preamp Gain56dB✓ 68dB
Dynamic Range110dB✓ 122dB
Mic InputsEven
XLR Inputs22
MonitoringAudient iD24
Headphone Outputs1✓ 2
Direct MonitoringYesYes
Creator FeaturesAudient iD24
LoopbackYesYes
ADAT ExpansionNo✓ Yes
MIDI I/OIn/OutNone
Bundled SoftwareAbleton Live Lite, Analog Lab Intro, Arturia FX, Guitar RigAudient ARC
ConnectivityAudient iD24
TRS Outputs2✓ 4
Connection Typeusb-c, xlr, trsusb-c, xlr, trs
PowerEven
Bus PoweredYesYes
Phantom PowerYesYes
BuildNot enough data
Dimensions200 x 100 x 43 mmno data
Weight0.43 kgno data
CompatibilityNot enough data
Operating Systemno datano data

A group is won by whoever takes more of its rows outright. Specs the catalog cannot rank are shown but never decide a group.

Bottom Line

Who each one is for

The Audient iD24 is the pick on the specs the catalog holds, but “better on paper” and “right for you” are different questions. Each case below names what the product is actually good at and who that suits.

The alternative
Budget Pick

At $149.99, the Arturia MiniFuse 2 is the most affordable option — 62% less than the priciest pick. It leads in sample rate (192kHz). Covers the essentials without stretching your budget.

  • + Higher sample rate (192kHz vs 96kHz)
  • + Built-in loopback for streaming audio routing
  • × Weaker dynamic range (110dB vs 122dB)
  • × Weaker preamp gain (56dB vs 68dB)
  • × Fewer headphone outputs (1 vs 2)

Also worth knowing

  • ✓ You want 192kHz sample rate for higher-resolution audio
  • ✓ Budget is your top priority — $249.01 less than the priciest option
  • ✓ You have MIDI gear to plug in without a separate adapter

Look elsewhere if

  • × You need the best dynamic range available
  • × You need the best preamp gain available

Best for budget-conscious creators, high-resolution audio production, streamers with audio routing needs.

Our pick
Best ValuePremium PickMost Connectivity

The Audient iD24 is the priciest at $399.00, but leads on specs where it counts. It leads in dynamic range (122dB) and preamp gain (68dB). Offers the most spec advantages per dollar in this comparison.

  • + Better dynamic range (122dB vs 110dB)
  • + Better preamp gain (68dB vs 56dB)
  • + More headphone outputs (2 vs 1)
  • + Better ADAT expansion (Yes vs No)
  • × Lower sample rate (96kHz vs 192kHz)

Also worth knowing

  • ✓ You want the stronger dynamic range (122dB)
  • ✓ You want the stronger preamp gain (68dB)
  • ✓ You want room for eight more inputs later, without replacing the box

Look elsewhere if

  • × You need the highest sample rate available (192kHz)

Best for value-focused buyers, professionals who want the best, complex setup builders.

Frequently Asked Questions

What is the main difference between Arturia MiniFuse 2 and Audient iD24?

The clearest difference is ADAT expansion, which the Audient iD24 has and the Arturia MiniFuse 2 does not. Across the catalog's specification sheet the two differ on 6 specs. They match on 7 specs, including connection type, bit depth and phantom power. Two audio interfaces from Arturia and Audient, each taking a different approach to audio quality and I/O flexibility.

Which is better for streaming, Arturia MiniFuse 2 or Audient iD24?

Get the Audient iD24. The Audient iD24 wins Preamps, Monitoring, Creator Features and Connectivity. It is the pricier of the two at $399, so the Arturia MiniFuse 2 stays the pick if $249.01 matters more than those specs.

What do the Arturia MiniFuse 2 and Audient iD24 have in common?

Both share 7 specifications in the catalog, including connection type (usb-c, xlr, trs), bit depth (24-bit), phantom power (Yes) and XLR inputs (2), among others. None of those is a reason to pick one over the other.

Is the Audient iD24 worth the extra $249 over the Arturia MiniFuse 2?

The Audient iD24 costs $399.00 against $149.99, a difference of $249. The premium buys ADAT expansion (Yes), headphone outputs (2) and TRS outputs (4). Whether that is worth it depends on which of those you would actually use.

Related Comparisons

Arturia MiniFuse 2 vs Focusrite Scarlett 18i20 3rd Gen Compare → Audient iD24 vs Roland BRIDGE CAST X Compare → Arturia MiniFuse 2 vs Focusrite Scarlett 2i2 (3rd Gen) Compare → Audient iD24 vs BEACN Studio Audio Interface Compare → Arturia MiniFuse 2 vs Focusrite Scarlett Solo (4th Gen) Compare → Audient iD24 vs Focusrite Scarlett 2i2 (4th Gen) Compare →